Funksjoner og funksjoner til forskjellige typer sprøytestøpemaskiner.

Apropossprøytestøping maskiner, antagelig burde de fleste ikke føle seg veldig ukjente. Den såkalte sprøytestøpemaskinen kan faktisk også kalles en injeksjonsmaskin. Det er det viktigste støpeutstyret som bruker plaststøpeformer for å lage plastprodukter i forskjellige former. Det kan deles inn i mange forskjellige kategorier i henhold til plastifiseringsmetoden, maskinens overføringsmetode og driftsmetoden. For å hjelpe brukerne til å utnytte verdien avsprøytestøping maskiner, Tongjia Heavy Industries, a professional manufacturer of sprøytestøping maskiner, will introduce the characteristics and scope of application of different types of sprøytestøping maskiner in detail.
Den første typen: horisontal sprøytestøpemaskin
This is a relatively common type of sprøytestøping maskin. The clamping part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its characteristics are: the body is short, easy to operate and maintain; the machine has a low center of gravity, and the installation is relatively stable; after the product is ejected, it can automatically fall by gravity, and it is easy to realize fully automatic operation. At present, most of the sprøytestøping maskiner on the market adopt this type.

Den andre typen: vertikalsprøytestøping maskin

In this type of sprøytestøping maskin, the clamping part and the injection part are on the same vertical centerline, and the mold is opened in the vertical direction. Therefore, it occupies a small area, it is easy to place inserts, it is convenient to load and unload molds, and the materials falling from the hopper can be plasticized more uniformly. However, the product is not easy to automatically fall after being ejected, and must be removed by hand, which is not easy to realize automatic operation. Vertical sprøytestøping maskiner are suitable for small sprøytestøping maskiner. Generally, sprøytestøping maskiner below 60 grams are more commonly used, and large and medium-sized machines are not suitable.

The third type: Angle sprøytestøping maskin

The injection direction of the angle sprøytestøping maskin is on the same surface as the mold interface. It is particularly suitable for processing flat products where gate marks are not allowed in the machining center. It occupies a smaller area than a horizontal sprøytestøping maskin, but the inserts placed in the mold are easy to tilt and fall. This type of sprøytestøping maskin is suitable for small machines.

The fourth type: multi-mode turntable sprøytestøping maskin

Det er en spesiellsprøytestøping maskin with multi-station operation. Its characteristic is that the mold clamping device adopts a turntable structure, and the mold rotates around the shaft. This type of sprøytestøping maskin gives full play to the plasticizing capacity of the injection device, which can shorten the production cycle and increase the production capacity of the machine.